Gateway E-4610D
From GanjaLinux
Contents |
Hardware
System Model System Manufacturer: Gateway System Name: E-4610D 54.10121.051 System Serial Number: 0038896329 Chassis Serial Number: 0038896329 Enclosure Type: Desktop Processor Number of processors: 1 Number of cores: 2 per processor Number of threads: 2 (max 2) per processor Name: Intel Core 2 Duo E6600 Code Name: Conroe Specification: 2.40 GHz Package: Socket 775 LGA Family/Model/Stepping: 6.F.6 Extended Family/Model: 6.F Core Stepping: B2 Technology: 65 nm Core Speed: 1598.4 MHz Multiplier x Bus speed: 6.0 x 266.4 MHz Rated Bus speed: 1065.6 MHz Stock frequency: 2400 MHz Instruction sets: MMX, SSE, SSE2, SSE3, SSSE3, EM64T L1 Data cache: 2 x 32 KBytes, 8-way set associative, 64-byte line size L1 Instruction cache: 2 x 32 KBytes, 8-way set associative, 64-byte line size L2 cache: 4096 KBytes, 16-way set associative, 64-byte line size Maximum Bit Length: 64 Hardware D.E.P.: Yes Hardware Virtualization: Yescc Main Circuit Board Board: Intel Corporation DQ965MT AAD36265-503 Serial Number: AZMT701000BZ Bus Clock: 266 megahertz BIOS Vendor: Intel Corp. BIOS Version: CO96510J.15A.0151.2007.0201.1828 BIOS Date: 02/01/2007 Chipset & Memory Northbridge: Intel Q965 rev. C1 Southbridge: Intel 82801H0 (ICH8D0) rev. 02 Memory Type: DDR2 Memory Size: 2048 MBytes Memory Modules Module 1: DDR2, PC2-5300 (333 MHz), 1024 MBytes, Samsung Module 2: DDR2, PC2-5300 (333 MHz), 1024 MBytes, Samsung 2022 Megabytes Installed Memory Slot 'J6H1' has 1024 MB (serial number 0x713056B4) Slot 'J6H2' is Empty Slot 'J6J1' has 1024 MB (serial number 0x713056B2) Slot 'J6J2' is Empty Drives HL-DT-ST RW/DVD GCC-4482B [CD-ROM drive] WDC WD1600JS-22MHB0 [Hard drive] (160.04 GB) -- drive 0 Local Drive Volumes c: (NTFS on drive 0) 156.00 GB 148.68 GB free d: (FAT32 on drive 0) 4.02 GB 1.63 GB free Network Drives None detected Controllers Intel(R) ICH8 2 port Serial ATA Storage Controller - 2825 Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820 Primary IDE Channel [Controller] (4x) Secondary IDE Channel [Controller] (4x) Standard Dual Channel PCI IDE Controller (2x) Display Intel(R) Q965/Q963 Express Chipset Family [Display adapter] (2x) DELL P1110 [Monitor] (19.7"vis, s/n 9171R0AO6RHX, October 2000) (3x) Bus Adapters Intel(R) ICH8 Family USB Universal Host Controller - 2830 Intel(R) ICH8 Family USB Universal Host Controller - 2831 Intel(R) ICH8 Family USB Universal Host Controller - 2832 Intel(R) ICH8 Family USB Universal Host Controller - 2834 Intel(R) ICH8 Family USB Universal Host Controller - 2835 Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836 Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A Multimedia SigmaTel High Definition Audio CODEC Communications Intel(R) 82566DM Gigabit Network Connection Physical Address: 00:19:D1:37:66:2C Other Devices Standard 101/102-Key or Microsoft Natural PS/2 Keyboard Microsoft PS/2 Mouse USB Root Hub (7x)
Linux Installation
Research
- Serial ATA (SATA) Linux hardware/driver status report
- Kernel 2.6.10 won't recognize my sata HD I think
- Re: Xen-users Kernel 2.4
GParted-livecd 0.3.3
# uname -a Linux (none) 2.6.20-gentoo #1 Wed Feb 21 02:01:45 UTC 2007 i686 unknown
Test 1
- BIOS Drive Configuration
- ATA/IDE Mode: Legacy
- S.M.A.R.T.: Enable
... No bootable medium found. ... Could not find CD to boot.
# dmesg ... hda: cache flushes supported hda: hda1 hda2 ... ata_piix 000:00:1f.2: version 2.00ac7 ata_piix 000:00:1f.2: MAP [ P0 P2 P1 P3 ] PCI: Found IRQ 11 for device 000:00:1f.2 PCI: Sharing IRQ 11 with 0000: 00:1c.3 PCI: Sharing IRQ 11 with 0000: 00:1d.1 PCI: Sharing IRQ 11 with 0000: 00:1f.5 ata: 0x1F0 IDE port busy ata: conflict with ide0 PCI: Setting latency timer of device 000:00:1f.2 to 64 ata1: DUMMY ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2118 irq 15 scsi2 : ata_piix scsi3 : ata_piix ATA: abnormal status 0x7F on port 0x117 ata_piix 000:00:1f.5: MAP [ P0 P2 P1 P3 ] PCI: Found IRQ 11 for device 000:00:1f.5 PCI: Sharing IRQ 11 with 0000: 00:1c.3 PCI: Sharing IRQ 11 with 0000: 00:1d.1 PCI: Sharing IRQ 11 with 0000: 00:1f.2 PCI: Setting latency timer of device 000:00:1f.5 to 64 ata3: SATA max UDMA/133 cmd 0x2138 ctl 0x2176 bmdma 0x20F0 irq 11 ata4: SATA max UDMA/133 cmd 0x2130 ctl 0x2172 bmdma 0x20F8 irq 11 scsi4 : ata_piix ATA: abnormal status 0x7F on port 0x213F scsi5 : ata_piix ATA: abnormal status 0x7F on port 0x2137 ...
Test 2
- BIOS Drive Configuration
- ATA/IDE Mode: Native
- Configure SATA as: IDE
- S.M.A.R.T.: Enable
... No bootable medium found. ... Could not find CD to boot.
# dmesg ... ata_piix 0000:00:1f.2: version 2.00ac7 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] PCI: Sharing IRQ 11 with 0000: 00:1c.3 PCI: Sharing IRQ 11 with 0000: 00:1d.1 PCI: Sharing IRQ 11 with 0000: 00:1f.5 PCI: Setting latency timer of device 000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x2148 ctl 0x217E bmdma 0x2110 irq 11 ata2: SATA max UDMA/133 cmd 0x2140 ctl 0x217A bmdma 0x2118 irq 11 scsi2 : ata_piix ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi3 : ata_piix ATA: abnormal status 0x7F on port 0x2147 scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-22M 02.0 PQ: 0 ANSI: 5 SCSI device sda: 312581808 512-byte hdwr sectores (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:0:0: Attached scsi disk sda sd 2:0:0:0: Attached scsi generic sq0 type 0 ata_piix 000:00:1f.5: MAP [ P0 P2 P1 P3 ] PCI: Found IRQ 11 for device 000:00:1f.5 PCI: Sharing IRQ 11 with 0000: 00:1c.3 PCI: Sharing IRQ 11 with 0000: 00:1d.1 PCI: Sharing IRQ 11 with 0000: 00:1f.2 PCI: Setting latency timer of device 000:00:1f.5 to 64 ata3: SATA max UDMA/133 cmd 0x2138 ctl 0x2176 bmdma 0x20F0 irq 11 ata4: SATA max UDMA/133 cmd 0x2130 ctl 0x2172 bmdma 0x20F8 irq 11 scsi4 : ata_piix ATA: abnormal status 0x7F on port 0x213F scsi5 : ata_piix ATA: abnormal status 0x7F on port 0x2137 ...
Test 3
- BIOS Drive Configuration
- ATA/IDE Mode: Native
- Configure SATA as: RAID
- S.M.A.R.T.: Enable
... No bootable medium found. ... Could not find CD to boot.
# dmesg ... ahci 0000:00:1f.2: version 2.0 PCI: Found IRQ 11 for device 0000:00:1f.2 PCI: Sharing IRQ 11 with 0000:00:1c.3 PCI: Sharing IRQ 11 with 0000:00:1d.1 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 2 Gbps 0x3F impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xF8C2A100 ctl bmdma 0x0 irq 11 ata2: SATA max UDMA/133 cmd 0xF8C2A180 ctl bmdma 0x0 irq 11 ata3: SATA max UDMA/133 cmd 0xF8C2A200 ctl bmdma 0x0 irq 11 ata4: SATA max UDMA/133 cmd 0xF8C2A280 ctl bmdma 0x0 irq 11 ata5: SATA max UDMA/133 cmd 0xF8C2A300 ctl bmdma 0x0 irq 11 ata6: SATA max UDMA/133 cmd 0xF8C2A380 ctl bmdma 0x0 irq 11 scsi2 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi3 : ahci ata2: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi6 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi7 : ahci ata6: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-22M 02.0 PQ: 0 ANSI: 5 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:0:0: Attached scsi disk sda sd 2:0:0:0: Attached scsi generic sq0 type 0
Test 4
- BIOS Drive Configuration
- ATA/IDE Mode: Native
- Configure SATA as: AHCI
- S.M.A.R.T.: Enable
... No bootable medium found. ... Could not find CD to boot.
# dmesg ... ahci 0000:00:1f.2: version 2.0 PCI: Found IRQ 11 for device 0000:00:1f.2 PCI: Sharing IRQ 11 with 0000:00:1c.3 PCI: Sharing IRQ 11 with 0000:00:1d.1 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 2 Gbps 0x3F impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xF8C2A100 ctl bmdma 0x0 irq 11 ata2: SATA max UDMA/133 cmd 0xF8C2A180 ctl bmdma 0x0 irq 11 ata3: SATA max UDMA/133 cmd 0xF8C2A200 ctl bmdma 0x0 irq 11 ata4: SATA max UDMA/133 cmd 0xF8C2A280 ctl bmdma 0x0 irq 11 ata5: SATA max UDMA/133 cmd 0xF8C2A300 ctl bmdma 0x0 irq 11 ata6: SATA max UDMA/133 cmd 0xF8C2A380 ctl bmdma 0x0 irq 11 scsi2 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi3 : ahci ata2: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi6 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi7 : ahci ata6: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-22M 02.0 PQ: 0 ANSI: 5 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:0:0: Attached scsi disk sda sd 2:0:0:0: Attached scsi generic sq0 type 0 ...
Test 1-4 Results & Conclusion
- AHCI module detects SATA drive as device sda (sda1 is mountable)
- PATA CD-ROM drive not detected
- parts of dmesg cannot be seen
- disable USB ports from BIOS to avoid so many kprintf's
Test 5
- BIOS Drive Configuration
- ATA/IDE Mode: Native
- Configure SATA as: AHCI
- S.M.A.R.T.: Enable
- BIOS USB Configuration
- USB Devices: Disabled
... No bootable medium found. ... Could not find CD to boot.
# dmesg ... ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ... ahci 0000:00:1f.2: version 2.0 PCI: Found IRQ 10 for device 0000:00:1f.2 PCI: Sharing IRQ 10 with 0000:00:1c.3 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 2 Gbps 0x3F impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xF8C2A100 ctl bmdma 0x0 irq 10 ata2: SATA max UDMA/133 cmd 0xF8C2A180 ctl bmdma 0x0 irq 10 ata3: SATA max UDMA/133 cmd 0xF8C2A200 ctl bmdma 0x0 irq 10 ata4: SATA max UDMA/133 cmd 0xF8C2A280 ctl bmdma 0x0 irq 10 ata5: SATA max UDMA/133 cmd 0xF8C2A300 ctl bmdma 0x0 irq 10 ata6: SATA max UDMA/133 cmd 0xF8C2A380 ctl bmdma 0x0 irq 10 scsi2 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi3 : ahci ata2: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi6 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi7 : ahci ata6: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-22M 02.0 PQ: 0 ANSI: 5 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:0:0: Attached scsi disk sda sd 2:0:0:0: Attached scsi generic sq0 type 0 ...
Test 5 Results & Conclusions
- CD-ROM drive is still not detected on ide0
- perhaps libata or pata_marvell kernel modules are required (however, they are not on the live CD)
openSuse LiveCD 10.2
$ uname -a Linux linux 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC 2006 i686 i686 i386 GNU/Linux $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping : 6 cpu MHz : 1596.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm bogomips : 4798.74 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping : 6 cpu MHz : 1596.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm bogomips : 4795.54 $ sudo mount /dev/sda1 /mnt $ sudo /sbin/fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 491 19456 152344395 7 HPFS/NTFS /dev/sda2 1 490 3935893+ b W95 FAT32 Partition table entries are not in disk order $ sudo /sbin/hdparm /dev/sda /dev/sda: IO_support = 0 (default 16-bit) HDIO_GET_UNMASKINTR failed: Inappropriate ioctl for device HDIO_GET_DMA failed: Inappropriate ioctl for device HDIO_GET_KEEPSETTINGS failed: Inappropriate ioctl for device readonly = 0 (off) readahead = 256 (on) geometry = 19457/255/63, sectors = 312581808, start = 0 $ /sbin/lspci | grep -i ide 00:03.2 IDE interface: Intel Corporation 82Q963/Q965 PT IDER Controller (rev 02) 02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1) $ /sbin/lspci | grep -i sata 00:1f.2 SATA controller: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA AHCI Controller (rev 02) $ lsmod Module Size Used by nls_utf8 6272 1 ntfs 210580 1 usbhid 52192 0 ipv6 263584 16 af_packet 29320 2 snd_pcm_oss 53376 0 snd_mixer_oss 21248 2 snd_pcm_oss snd_seq 60272 0 joydev 13504 0 snd_usb_audio 81024 0 snd_usb_lib 20992 1 snd_usb_audio snd_rawmidi 29824 1 snd_usb_lib snd_seq_device 12812 2 snd_seq,snd_rawmidi snd_hwdep 13956 1 snd_usb_audio cpufreq_conservative 11912 0 cpufreq_ondemand 10892 2 cpufreq_userspace 9088 0 cpufreq_powersave 5888 0 speedstep_centrino 12832 1 freq_table 8832 1 speedstep_centrino thermal 18568 0 processor 34664 2 speedstep_centrino,thermal fan 8964 0 button 10896 0 battery 14340 0 ac 9476 0 loop 20488 0 dm_mod 60184 0 sd_mod 24576 2 snd_hda_intel 23060 1 snd_hda_codec 164352 1 snd_hda_intel snd_pcm 86916 4 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec snd_timer 27908 2 snd_seq,snd_pcm snd 61188 12 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_seq_device,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer soundcore 13792 2 snd intel_agp 27804 1 agpgart 35528 1 intel_agp i2c_i801 11660 0 i2c_core 25216 1 i2c_i801 snd_page_alloc 14472 2 snd_hda_intel,snd_pcm ahci 25860 1 generic 9220 0 [permanent] parport_pc 42084 0 parport 39752 1 parport_pc e1000 119360 0 sg 38044 0 pata_marvell 10624 1 usb_storage 82112 0 uhci_hcd 26892 0 ehci_hcd 34696 0 ohci_hcd 23428 0 usbcore 114896 7 usbhid,snd_usb_audio,snd_usb_lib,usb_storage,uhci_hcd,ehci_hcd,ohci_hcd cloop 17632 1 sr_mod 20132 1 libata 119188 2 ahci,pata_marvell scsi_mod 136712 6 sd_mod,ahci,sg,usb_storage,sr_mod,libata ide_disk 20480 0 ide_cd 42272 0 cdrom 38432 2 sr_mod,ide_cd ide_core 129992 4 generic,usb_storage,ide_disk,ide_cd
Test 1
- ATA/IDE Mode: Legacy
- S.M.A.R.T.: Enable
$ dmesg Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007d543000 (usable) BIOS-e820: 000000007d543000 - 000000007d5c2000 (ACPI NVS) BIOS-e820: 000000007d5c2000 - 000000007e5ec000 (usable) BIOS-e820: 000000007e5ec000 - 000000007e5f8000 (reserved) BIOS-e820: 000000007e5f8000 - 000000007e6a3000 (usable) BIOS-e820: 000000007e6a3000 - 000000007e6a4000 (ACPI NVS) BIOS-e820: 000000007e6a4000 - 000000007e6a9000 (ACPI data) BIOS-e820: 000000007e6a9000 - 000000007e6f2000 (ACPI NVS) BIOS-e820: 000000007e6f2000 - 000000007e6f3000 (usable) BIOS-e820: 000000007e6f3000 - 000000007e6ff000 (ACPI data) BIOS-e820: 000000007e6ff000 - 000000007e700000 (usable) BIOS-e820: 000000007e700000 - 000000007f000000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 1127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe200 On node 0 totalpages: 517888 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 288512 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000 GATEWA ) @ 0x000fe020 ACPI: RSDT (v001 GATEWA SYSTEM 0x00000097 0x01000013) @ 0x7e6fd038 ACPI: FADT (v001 GATEWA SYSTEM 0x00000097 MSFT 0x01000013) @ 0x7e6fc000 ACPI: MADT (v001 GATEWA SYSTEM 0x00000097 MSFT 0x01000013) @ 0x7e6f7000 ACPI: WDDT (v001 GATEWA SYSTEM 0x00000097 MSFT 0x01000013) @ 0x7e6f6000 ACPI: MCFG (v001 GATEWA SYSTEM 0x00000097 MSFT 0x01000013) @ 0x7e6f5000 ACPI: ASF! (v032 GATEWA SYSTEM 0x00000097 MSFT 0x01000013) @ 0x7e6f4000 ACPI: SLIC (v001 GATEWA SYSTEM 0x00000097 MSFT 0x01000013) @ 0x7e6f3000 ACPI: SSDT (v001 GATEWA CpuPm 0x00000097 MSFT 0x01000013) @ 0x7e6a8000 ACPI: SSDT (v001 GATEWA Cpu0Ist 0x00000097 MSFT 0x01000013) @ 0x7e6a7000 ACPI: SSDT (v001 GATEWA Cpu1Ist 0x00000097 MSFT 0x01000013) @ 0x7e6a6000 ACPI: SSDT (v001 GATEWA Cpu2Ist 0x00000097 MSFT 0x01000013) @ 0x7e6a5000 ACPI: SSDT (v001 GATEWA Cpu3Ist 0x00000097 MSFT 0x01000013) @ 0x7e6a4000 ACPI: TCPA (v001 INTEL TIANO 0x00000002 MSFT 0x01000013) @ 0x7e6a3000 ACPI: DSDT (v001 GATEWA SYSTEM 0x00000097 MSFT 0x01000013) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7f000000:80e00000) Detected 2397.758 MHz processor. Built 1 zonelists. Total pages: 517888 Kernel command line: BOOT_IMAGE=vmlinuz initrd=initrd.gz login=gdm splash=silent vga=0x31a bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2014640k/2071552k available (1697k kernel code, 54804k reserved, 968k data, 196k init, 1153128k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4798.75 BogoMIPS (lpj=9597518) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 34425k freed ACPI: Core revision 20060707 CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4795.55 BogoMIPS (lpj=9591103) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Total of 2 processors activated (9594.31 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=33 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f could not be reserved pnp: 00:06: ioport range 0x680-0x6ff has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: 90400000-904fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 1000-1fff MEM window: 90000000-900fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: 90500000-905fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: 90600000-906fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: 90700000-907fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1172336495.880:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] vesafb: framebuffer at 0x80000000, mapped to 0xf8880000, using 7616k, total 7616k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3). Console: switching to colour frame buffer device 156x60 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 169 0000:00:03.3: ttyS1 at I/O 0x2120 (irq = 169) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 196k freed Time: tsc clocksource has been installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized libata version 2.00 loaded. cloop: Initializing cloop v2.04 cloop: loaded (max 8 devices) usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 185, io mem 0x90326c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 58, io mem 0x90326800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 177, io base 0x000020c0 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 66, io base 0x000020a0 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected input: ImPS/2 Generic Wheel Mouse as /class/input/input2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 58, io base 0x00002080 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 193, io base 0x00002060 usb usb6: new device found, idVendor=0000, idProduct=0000 usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 185, io base 0x00002040 usb usb7: new device found, idVendor=0000, idProduct=0000 usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:00.0 to 64 ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1026 bmdma 0x1000 irq 169 scsi0 : pata_marvell BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 ata1.00: ATAPI, max UDMA/33 ata1.00: applying bridge limits ata1.00: configured for UDMA/33 Vendor: HL-DT-ST Model: RW/DVD GCC-4482B Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 05 sr0: scsi3-mmc drive: 0x/0x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 ISO 9660 Extensions: RRIP_1991A cloop: losetup_file: 254874 blocks, 16384 bytes/block, largest block is 16397 bytes. ISO 9660 Extensions: RRIP_1991A sr 0:0:0:0: Attached scsi generic sg0 type 5 Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:19:d1:37:66:2c e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 193 Linux agpgart interface v0.101 (c) Dave Jones parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata2: SATA max UDMA/133 cmd 0xF9336100 ctl 0x0 bmdma 0x0 irq 82 ata3: SATA max UDMA/133 cmd 0xF9336180 ctl 0x0 bmdma 0x0 irq 82 ata4: SATA max UDMA/133 cmd 0xF9336200 ctl 0x0 bmdma 0x0 irq 82 ata5: SATA max UDMA/133 cmd 0xF9336280 ctl 0x0 bmdma 0x0 irq 82 ata6: SATA max UDMA/133 cmd 0xF9336300 ctl 0x0 bmdma 0x0 irq 82 ata7: SATA max UDMA/133 cmd 0xF9336380 ctl 0x0 bmdma 0x0 irq 82 scsi1 : ahci ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) scsi6 : ahci ata7: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: WDC WD1600JS-22M Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 scsi 1:0:0:0: Attached scsi generic sg1 type 0 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 66 agpgart: Detected an Intel 965Q Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0x80000000 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 90 PCI: Setting latency timer of device 0000:00:1b.0 to 64 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 1:0:0:0: Attached scsi disk sda ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2121: speaker_outs=3 (0xd/0xf/0x10/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2123: hp=0xa, dig_out=0x21, din_in=0x0 ALSA sound/pci/hda/hda_codec.c:2131: inputs: mic=0xe, fmic=0xb, line=0xc, fline=0x0, cd=0x0, aux=0x0 hda_codec: num_steps = 0 for NID=0x17 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com loop: loaded (max 8 devices) bootsplash: status on console 0 changed to off ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 ibm_acpi: ec object not found usbcore: registered new driver snd-usb-audio hda_codec: num_steps = 0 for NID=0x17 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com> e1000: eth0: e1000_reset: Hardware Error ADDRCONF(NETDEV_UP): eth0: link is not ready hda_codec: num_steps = 0 for NID=0x17 hda_codec: num_steps = 0 for NID=0x17 e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready NET: Registered protocol family 17 eth0: no IPv6 routers present ip_tables: (C) 2000-2006 Netfilter Core Team
Test 1 Results & Conclusions
- AHCI SATA loaded. drive /dev/sda detected and mountable
- CD-ROM drive detected and loaded and attached SCSI CD-ROM /dev/sd0
Slackware 11.0
# uname -a Linux slackware 2.6.17.13 #4 Wed Sep 27 22:37:23 CDT 2006 i686 unknown # cat /proc/cpuinfo TODO # fdisk -l Disk /dev/sda: 160.0 GB, 160041885969 bytes 255 heads, 63 sectors/tracks, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 461 19456 152344395 7 HPFS/NTFS /dev/sda2 1 490 3935893+ b W95 FAT32 Partition table entries are not in disk order # hdparm /dev/sda /dev/sda: readonly = 0 (off) geometry = 19457/255/63, sectors = 312581808, start = 0 # lspci | grep -i ide lspci: No such file or directory # lspci | grep -i sata lspci: No such file or directory
Test 1
- BIOS Drive Configuration
- ATA/IDE Mode: Native
- Configure SATA as: AHCI
- S.M.A.R.T.: Enable
- BIOS USB Configuration
- USB Devices: Enable
Slamd64 11.0
- BIOS Drive Configuration
- ATA/IDE Mode: Native
- Configure SATA as: AHCI
- S.M.A.R.T.: Enable
- BIOS USB Configuration
- USB Devices: Enable
Test 1
... ACPI: Assume root bridge [\_SB_.PC10] bus is 0
Test 1 Results
- System hangs
Slamd64-current
This is a custom build ISO with the testing/packages/linux-2.6.20/ kernels copied to kernels (overwriting original huge26.s 2.6.18 kernel from the official Slamd64 11 ISO).
However, of those kernels only huge26.s could be loaded still did not boot FIXME. A new huge26.s is being built with the kernel config options for any marvell device built in.
